微機控制電子式測試儀

主要技術參數
（一）主機參數：
立柱數：4；
拉伸空間（mm）：700；
壓縮空間（mm）：700；
移動橫梁行程（mm）：1100；
橫梁調整速度（mm/min）：500；
試驗寬度（mm）：370；
立柱直徑（mm）：Ф30；
絲杠直徑（mm）：GD3205-4；
工作臺尺寸（mm）：715×244；
工作臺厚度（mm）：38；
上橫梁厚度（mm）：50；
移動橫梁厚度（mm）：60；
（二）測量參數：
試驗力（kN）：20；
試驗機級別：1級；
試驗力測量范圍：1%～F.S（負荷）；
試驗力測量精度：優于示值的±1%；
試驗力分辨力：滿量程的1/120000（全量程只有一個分辨力，不分檔）；
位移測量準確度：±1%；
位移分辨力：0.001mm；
位移示值誤差：示值的±1%以內；
變形分辨力：0.001mm；
變形示值相對誤差：±1%以內；
（三）微機控制電子式測試儀控制參數：
應力控制速率范圍：0.005～5％FS/s；
應力控制速率精度：速率＜0.05%FS/s時，為設定值的±2%以內，速率≥0.05%FS/s時，為設定值的±1%以內；
應變控制速率范圍：0.005～5%FS/s；
應變控制速率精度：速率＜0.05%FS/s時，為設定值的±2%以內，速率≥0.05%FS/s時，為設定值的±1%以內；
位移控制速率范圍：0.005～500mm/min；
位移控制速率精度：速率＜0.5mm/min時，為設定值的±1%以內，速率≥0.5mm/min時，為設定值的±0.2%以內；
（四）整機參數：
主機尺寸（mm）：720×500×1780；
主機重量（kg）：400；
功率（kW）：1.0；
供電電源：?jiǎn)蜗啵?20V；
使用環境：無震動、無粉塵；室溫（15-25℃）；濕度<70%；周?chē)鸁o(wú)振動，無腐蝕性介質，無強磁場干擾；電源電壓波動不超過額定電壓的10%。
功能特點
微機控制電子式測試儀是我公司開發的經濟實用型機型，本產品采用高強度光杠固定上橫梁和工作臺面，使之構成高剛性的門式框架結構，采用國產伺服電機驅動，伺服電機通過傳動機構帶動橫梁上下移動，實現試驗加載過程。拉伸壓縮空間相對小，柱間距小。配置相對低端。精度1級。
微機控制電子式測試儀主要用于各種金屬、非金屬及復合材料進行力學性能指標的測試。精密的自動控制和數據采集系統，實現了數據采集和控制過程的全數字化調整。在拉伸試驗中，檢測材料的承載拉力、抗拉強度、伸長變形、延伸率等技術指標。以上檢測參數在試驗結束后，由微電腦控制器根據試驗開始時設置的試驗參數條件自動計算，同時顯示相應的試驗結果，并自動保存；各檢測參數在試驗結束后可查詢顯示。
微機控制電子式測試儀適用于金屬、膠粘劑、管材、型材、航空航天、石油化工、防水卷材、電線電纜、紡織、纖維、橡膠、陶瓷、食品、醫藥包裝、土工布、薄膜、木材、紙張等制造業以及各級產品質量監督部門，同時還適用于大中專院校進行教學演示工作。
Microcomputer controlled electronic testing instrument
Main technical parameters
(1) host parameter:
Column number: 4;
Stretch space (mm): 700;
Compression space (mm): 700;
Moving beam stroke (mm): 1100;
Beam adjustment speed (mm/min): 500;
Test width (mm): 370;
The column diameter (mm): 30;
Screw diameter (mm): GD3205-4;
Table size (mm): 715 x 244;
Table thickness (mm): 38;
Upper beam thickness (mm): 50;
Moving beam thickness (mm): 60;
(two) measurement parameters:
Test force (kN): 20;
Test machine level: 1;
Test force measurement range: 1% ~ F.S (load);
Test force measurement accuracy: better than the value of 1%;
Test force resolution: full range of 1/120000 (the full range of only one resolution, no division);
Displacement measurement accuracy: + 1%;
Displacement resolution: 0.001mm;
Displacement indication error: within the value of 1%;
Deformation resolution: 0.001mm;
Relative error of deformation indication: within + 1%;
(three) microcomputer control electronic test instrument control parameters:
Stress control rate range: 0.005 ~ 5%FS/s;
The stress rate control accuracy rate was less than 0.05%FS/s, is less than the set value + 2%, the rate is not less than 0.05%FS/s, less than the set value + 1%;
Strain rate range: 0.005 ~ 5%FS/s;
Strain rate control accuracy rate was less than 0.05%FS/s, is less than the set value + 2%, the rate is not less than 0.05%FS/s, less than the set value + 1%;
Displacement control rate range: 0.005 ~ 500mm/min;
The displacement rate control accuracy: rate is less than 0.5mm/min, is less than the set value + 1%, the rate is not less than 0.5mm/min, less than the set value + 0.2%;
(four) the parameters of the whole machine:
Host size (mm): 720 x 500 x 1780;
Host weight (kg): 400;
Power (kW): 1;
Power supply: single phase, 220V;
Use environment: no vibration, no dust; room temperature (15-25 degrees C); humidity <70%; around no vibration, no corrosive media, no strong magnetic field interference; power supply voltage fluctuations do not exceed 10% of the rated voltage.
Functional features
Microcomputer control electronic tester is my company developed economical and practical models, this product is made of high strength light bars fixed on the crossbeam and the work table, so as to form the gantry high rigid frame structure, the use of domestic servo motor drive, servo motor drives the beam to move up and down through the transmission mechanism, realize the loading process. The tension compression space is relatively small, and the column spacing is small. Configuration is relatively low. Precision 1.
Microcomputer controlled electronic testing instrument is mainly used to test the mechanical properties of all kinds of metal, nonmetal and composite materials. Precision automatic control and data acquisition system, to achieve the data acquisition and control of the whole process of digital adjustment. In the tensile test, the test material, such as tensile strength, tensile strength, elongation, elongation and other technical indicators. The above parameters at the end of the test, the test parameters set by the microcomputer controller according to the test at the beginning of the automatic calculation, and display the corresponding test results, and automatically save the detection parameters; at the end of the trial after the query display.
Microcomputer control electronic tester is suitable for metal, adhesives, pipes, profiles, aerospace, petrochemical, waterproofing materials, wire and cable, fiber, textile, rubber, ceramics, food, pharmaceutical packaging, geotextile, film, wood, paper and other manufacturing industries as well as the level of product quality supervision department, also for teaching demonstration in the colleges work.